SAAoST
PHT SA    Tel: +27 861 777 993
Hygiene
/ Knife Holder Cleaning

Knife holder cleaning and sterilisation

Optimal cleaning and disinfection results.

Cleaning and sterilizing machine for knives and safety gloves, type 22510

Cleaning basin type 20550

Cleaning and sterilizing machine for knives and safety gloves, type 22510

The new cleaning method facilitates optimal and hygienic cleaning of areas that are difficult to access such as knife shafts and heavily soiled safety gloves.

Laterally arranged power spray rotors and power nozzles aimed specifically at problem areas on the utensils ensure optimal cleaning results in next to no time.

Each trolley has capacity for 16 knife holder units additionally loaded with slash-resistant gloves.

The machine can be used on just one side by pushing the trolleys in and pulling them out; alternatively, the fully loaded trolleys can be lined up one after the other and pushed all the way through the machine.

UV disinfection module type 22300

Cleaning basin type 20550

UV disinfection module type 22300

The UV disinfection module uses ultraviolet light to disinfect knife holders, knives, sharpening steels and
safety gloves. UVC light has an intensive germicidal effect. The wavelength 253,7 nm is absorbed to 85 %
in the nucleus of the microorganisms, by which the metabolism of the cells and their reproduction will be
suppressed. Bacteria, micro-organisms, yeasts and mould are eradicated or made inactive.

Dry disinfection prevents chemicals or water from being transmitted to the production line.

Operating costs are low because detergents and disinfectants are not required.

The six UV disinfection modules are waterproof and shatterproof and can be replaced without tools.
They have a service life of up to 8,000 hours.

Metal coverings around the module‘s entry and exit points prevent eye contact with the lamps thereby
providing protection against UV radiation.

A conveyor system, comprised of feed and discharge conveyors with a module conveyor in between,
ensures smooth transportation of knife holders through the module. All three conveyors use slat band
chains to keep contact surface areas to a minimum.

Advantages:

  • • Residue-free cold disinfection with no need for water or chemicals
  • • Low operating costs (no water or other products)
  • • Easy to install (power supply connection only)
  • • Easy to operate and maintain

Cleaning and sterilizing machine, type 22500, for ITEC knife holders

Cleaning basin type 20550

Cleaning and sterilizing machine, type 22500, for ITEC knife holders

Central cleaning and sterilisation of up to 24 full knife holders.

  • • sloped top prevents the suds from dripping
  • • washing and rinsing system made entirely of type 1.4301 stainless steel
  • • smooth inner walls for easy cleaning
  • • double-walled design with additional insulation
  • • deep-drawn, rounded tank with a capacity of just 85 litres
  • • Aktiv Plus sud filter system

Cleaning machine, type 22560

Cleaning basin type 20550

Cleaning machine, type 22560

For cleaning and sterilising a wide range of knives and cutting plates on a continuous basis.

Cleaning machine, type 22570

Cleaning basin type 20550

Cleaning machine, type 22570

For cleaning and sterilising knives on a continuous basis. The double-track version is especially suitable for heavily frequented areas.

Spray disinfection module, type 22400

Cleaning basin type 20550

Spray disinfection module, type 22400

Spray disinfection module, type 22240, for disinfecting knife holders on a continuous basis. Maximum hygiene with functional guarantee.

Sterilization basin, type 2160-6S

Cleaning basin type 20550

Sterilization basin, type 2160-6S

Robust basin for the thermal disinfection of knife holders especially designed for small operations.

Sterilization basin, type 2150

Cleaning basin type 20550

Sterilization basin, type 2150

For knives and small parts. Simple and trouble-free operation. The basin can also be optionally fitted with a cover and thermometer.

The flat heating element is installed within the double-walled lining, preventing it from calcifying and breaking down.

Sterilization basin, type 2151W

Cleaning basin type 20550

Sterilization basin, type 2151W

  • • For wall mounting
  • • Spiral heating element: 1 kW

The flat heating element is installed within the double-walled lining, preventing it from calcifying and breaking down.

Cleaning basin type 20550

Cleaning and sterilising sluice for circular knives of the following type:

Whizard Trimmer Series II with a maximum diameter of 135 mm.